| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
STARTER SOLENOID HARNESS REPLACEMENT (2DR) (PN 11671792)
0062 00
INSTALLATION (Continued)
2. Install starter wiring harness.
a. Remove nut (14) from starter ground terminal post (16).
b. Install starter ground cables (4) onto starter ground terminal post (16) reinstalling nut (14)
and lock washer (15).
c. Remove nut (22) from starter positive terminal post (24).
d. Install starter positive cables (10) onto starter positive terminal post (24) reinstalling
nut (22) and lock washer (23).
e. Install low voltage protection module lead (21) at starter solenoid.
f. Install low voltage protection module connector (13).
g. Install ground lead (17) to oil pan using screw (18), two flat washers (19) and new lock
washer (20) (item 108, WP 0175).
h. Install new tie wraps (25) (item 81, WP 0175) as necessary.
21
24
14, 15
16
25
13
22, 23, 24
10
17
4
21
25
20
14, 15
17
22, 23, 24
18
16
10
17
19
WP 0062 00-7
|
||
|
||
