| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
OIL COOLER REPLACEMENT, ENGINE AND TRANSMISSION
0072 00
REMOVAL (Continued)
NOTE
Adapter elbows for oil into and out of coolers all look the same.
However, one of the elbows is shorter on engine models 2CA and
2DA; it goes on the left bank cooler and is the lower fitting (oil into
cooler). Engine model 2DR adapter elbows are all the same length.
13. Remove inlet (32) and outlet (33) adapter
elbows.
a. Remove six self-locking nuts (34) with
flat washers (35). Discard self-locking
nuts.
33, 36
b. Remove two adapter elbows (32, 33).
32, 36
c. Remove and discard gaskets (36).
34, 35 (six places)
37
13. Remove transmission oil cooler (27)
38
28
thermostatic bypass valve (37).
23
a. Remove and discard gasket (38).
14. Remove engine oil cooler (23) thermostatic
bypass valve (39).
a. Remove and discard gasket (40).
40
39
WP 0072 00-5
|
||
|
||
