| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CYLINDER OIL DRAIN TUBES REPLACEMENT
0077 00
REMOVAL (Continued)
1. Remove [right bank flywheel end] oil drain tube (1).
a. Remove two cap screws (2) with lock washers (3) attaching oil drain tube (1) to oil pan.
b. Relieve tension on clamps (4) and reposition clamps (4) off hose (5).
c. Relieve tension on clamps (6) and reposition clamps (6) off hose (7).
d. Remove oil drain tube (1).
e. Remove gasket (8). Discard gasket and lock washers.
2. Remove [right bank turbosupercharger] oil drain tube (9).
a. Relieve tension on clamps (10) and reposition clamps (10) off hose (11).
b. Remove tube (9).
3. Remove [right bank damper end] oil drain tube (12).
a. Remove two cap screws (13) with lock washers (14).
b. Relieve tension on clamps (15) and reposition clamps (15) off hose (16).
c. Remove tube (12).
d. Remove gasket (17). Discard gasket and lock washers.
RIGHT BANK
4
5
4
10
1
11
10
2
8
3
9
FLYWHEEL END
6
67
15
16
15
12
13
DETAIL: Early version is illustrated. In the current version items 12
14
and 17 are a single piece (same for opposite side of engine).
17
DAMPER END
WP 0077 00-2
|
||
|
||
