| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CYLINDER OIL DRAIN TUBES REPLACEMENT
0077 00
INSTALLATION (Continued)
9. Assemble tube (9) to tube (1).
a. Push new, lubricated, hoses (7, 11) (item 313, WP 0175) (using lubricating oil, item 21,
b. Position clamp (6) onto end of tube (1), and then push hose (7) with tube (9) onto tube (1).
Do not clamp yet.
10. Install tubes (1) and (9) as an assembly.
a. Push new, lubricated, hose (5) (item 313, WP 0175) half way onto end of tube (1) and
secure with clamp (4).
b. Push hose (11) with tube (9) half way over turbosupercharger oil drain and hose (5) with
tube (1) onto tube (23) while placing lower end of tube (1) into position on oil pan.
c. Place a new gasket (8) (item 159, WP 0175) into position on oil pan.
d. Secure tube (1) to oil pan using two screws (2) with new lock washers (3) (item 93,
e. Secure hoses (5, 11) with clamps (4, 10).
f. Secure hose (7) with clamp (6).
23
RIGHT BANK
4
5
4
10
1
11
10
2
8
3
9
FLYWHEEL END
6
67
DAMPER END
END OF WORK PACKAGE
WP 0077 00-12
|
||
|
||
