| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL/WATER SEPARATOR REPAIR/FILTER ELEMENT REPLACEMENT
0085 00
REMOVAL (Continued)
CAUTION
Do not attempt to remove probes from control module. They are
permanently affixed, removal will destroy the module.
9. Remove two water level probes (11, 12) from separator (4).
a. Remove screw (13), with lock washer (14) and flat washer (15) to remove cushioned
clamp (16). Discard lock washer.
b. Loosen, but do not remove remaining mounting screws (13, 17).
c. Pull fuel water separator (4) away from mounting bracket (18).
d. Mark probes for location, then remove two water level probes (11, 12) from fuel water
separator (4) and place out of the way. Do not remove probes from control module (19).
10. Remove water separator (4).
a. Remove mounting screws (13, 17) to remove separator.
18
19
4
Lower
Probe
4
Upper
Probe
17
13
11
17
12
16
15
14
13
WP 0085 00-4
|
||
|
||
