| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
MANIFOLD HEATER FUEL FILTER AND SOLENOID REPLACEMENT
0087 00
DISASSEMBLY (Continued)
CAUTION
The manifold heater fuel filter must be removed from the engine to
thoroughly clean or replace parts not otherwise accessible. Never
clean inside of filter when connected to fuel lines. Unseen particles
could enter fuel lines and damage heater nozzles. Cap fuel lines when
removed from filter.
2. Disassemble fuel filter (2).
2
a. Remove sediment bowl (21).
b. Remove and discard O-ring (22).
22
c. Remove and discard element (23).
CLEANING
23
1. See Work Package 0028 for General
Cleaning Procedures.
21
INSPECTION
All parts must be inspected with care.
8
Replace parts if damage or wear exceeds
allowable limits.
1. See Work Package 0028 for General
Outlet Port
Inspection Procedures.
2. Inspect inlet and outlet ports of solenoid (8).
If felt filters are found, remove and discard
them. Felt filters are not required and should
Inlet Port (hidden)
be removed.
ASSEMBLY
2
1. Assemble fuel filter (2).
a. Install new element (23) (item 274, WP 0175).
22
23
b. Install new O-ring (22) (item 78, WP 0175).
c. Install sediment bowl (21).
21
WP 0087 00-3
|
||
|
||
