| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FLYWHEEL AND SPUR GEAR REPLACEMENT (2CA, 2DA)
0102 00
INSTALLATION (Continued)
NOTE
Eye bolt must be removed from flywheel before flywheel is drawn
tight against flange on crankshaft to permit flywheel to clear
transmission adapter lifting eye.
2. Install flywheel (2) (Continued).
c. Position aligned flywheel (2) against flange on crankshaft (9) and temporarily install three
equally spaced mounting screws (4).
d. Alternately tighten screws (4) to draw flywheel (2) toward flange on crankshaft (9) while
watching that eyebolt (6) does not contact transmission adapter (10).
e. When eyebolt (6) is near transmission adapter (10), disconnect lifting device (7) and
remove eyebolt.
f. Continue to tighten mounting screws (4) until flywheel is tight against crankshaft (9)
flange, and then remove screws (4).
10
7
6
2
4
2
9
WP 0102 00-5
|
||
|
||
