| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA)
0122 00
DISASSEMBLY
WARNING
Retaining rings are spring tension devices: take care when removing
or installing them. They can slip or break and become airborne
causing eye damage or other bodily harm.
1. Place throttle cross shaft assembly (12) in a machinist's vise and remove retaining ring (14)
from straight shaft (15). Discard retaining ring.
2. Remove bearing (16) using a suitable puller then remove retaining ring (17) from straight
shaft (15). Discard retaining ring and bearing.
3. Remove screw (18) and lock washer (19) from throttle lever assembly (8). Discard lock
washer.
4. Remove throttle lever assembly (8) and woodruff key (20) from straight shaft (15). Discard
woodruff key.
5. Remove retaining ring (21) and flat washer (22) from straight shaft (15). Discard retaining
ring.
6. Remove manual fuel shutoff lever assembly (23) from straight shaft (15). Plain seals (24) and
sleeve bearings (25) will be replaced in "Repair" of this work package.
7. Remove flat washer (26) and retaining ring (27) from straight shaft (15). Discard retaining
ring.
12
27 26
22 21
8
20
15
16 14
24 25
25 24
19
23
17
18
WP 0122 00-4
|
||
|
||
