| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL AND MANUAL FUEL SHUTOFF (2CA, 2DA)
0122 00
ASSEMBLY (Continued)
WARNING
Retaining rings are spring tension devices: take care when removing
or installing them. They can slip or break and become airborne
causing eye damage or other bodily harm.
9. Install new retaining ring (27) (item 21, WP 0175) and flat washer (26) onto straight
shaft (15).
10. Install manual fuel shutoff lever assembly (23), with (15) two plain seals (24) and two sleeve
bearings (25) installed, onto straight shaft (15).
11. Install flat washer (22) and new retaining ring (21) (item 21, WP 0175) onto straight
shaft (15).
12. Install new woodruff key (20) (item 103, WP 0175) onto straight shaft (15).
13. Install throttle lever assembly (8) over new woodruff key (20) and straight shaft (15).
a. Secure with screw (18) and new lock washer (19) (item 89, WP 0175).
14. Install new retaining ring (17) (item8, WP 0175) onto straight shaft (15) followed by
bearing (16), then install new retaining ring (14) (item 8, WP 0175).
12
27 26
22 21
8
20
15
16 14
24 25
25 24
19
23
17
18
WP 0122 00-10
|
||
|
||
