| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR (2DR)
0123 00
ASSEMBLY (Continued)
9. Install machine screw (56) and plain nut (55) in solenoid stop control (57).
10. Install spring retainer (49), new spring (48) (item 221, WP 0175), spring retainer (47), rigid
connecting link (43), and new spring pin (46) (item 24, WP 0175) on electrical solenoid (42).
11. Install a new gasket (45) (item 187, WP 0175) on electrical solenoid (42).
12. Install electrical solenoid (42) on solenoid housing assembly (12) while engaging rigid
connecting link (43) with solenoid control housing (44).
13. Secure electrical solenoid (42) to solenoid housing assembly (12) using two screws (40) and
two new lock washers (41) (item 92, WP 0175).
WARNING
Retaining rings are spring tension devices: take care when removing
or installing them. They can slip or break and become airborne
causing eye damage or other bodily harm.
14. Install two new retaining rings (39) (item 12, WP 0175) and two new bearings (38) (item 322,
40
41
42
45
49
48
46
47
12
43
44
57
38
55
39
37
39
56
38
WP 0123 00-12
|
||
|
||
