| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR
0129 00
ASSEMBLY
1. Press new ball bearing (41) (item 298, WP 0175) on hub assembly (32) using an arbor
press (30).
41
30
41
32
32
2. Place a dab of Lubriplate (item 23, WP 0173) in each ball pocket (A) to help keep ball
bearings in place during assembly.
3. Install shaft assembly (40) in fan drive hub (32).
4. Mount shaft assembly (40) with hub (32) in a machinist's vise.
5. Install housing assembly (35) on fan drive hub (32) assuring that screw holes align.
NOTE
There are three pockets for the springs and fifteen for the ball bearings in the
hub assembly. The pockets for the springs have a flat bottom while those for
the ball bearings are rounded. Be sure to place the springs and ball bearings
in the correct pockets. Use only six ball bearings, and space them evenly (skip
every other pocket).
6. Position six new ball bearings (37) (item 193, WP 0175) and three new springs (36)
(item 354, WP 0175) in fan drive hub assembly (32) pockets.
35
40
36
37
A
32
WP 0129 00-12
|
||
|
||
