| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR
0129 00
INSTALLATION (Continued)
9. Torque-tighten 24 self-locking nuts (15) to
150-175 inch-pounds (17-19.8 Nm).
3
6
10. Install new seal (6) in seal housing (1).
4
a. Install seal (6) (item 191, WP 0175) in
housing (1) with lip of seal towards
1
bottom of housing and felt towards top.
11. Install seal housing (1) on fan tower (2).
A
5
a. Assuring that mating surfaces are clean,
place new gasket (5) (item 257,
15
2
b. Install oil seal housing (1).
c. Secure using six screws (3) with flat
washers (4).
END OF WORK PACKAGE
WP 0129 00-17 (18 blank)
|
||
|
||
