| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FRONT LIFTING EYES AND GUIDES REPLACEMENT
0132 00
REMOVAL (Continued)
1. Remove left installation guide bar (1) and lifting eye (2).
a. Remove and discard four self-locking nuts (3).
b. Remove cushioned clamp (4) securing fuel return hose.
c. Remove and discard two self-locking nuts (5).
d. Remove two flat washers (6) then remove left installation guide bar (1). Retain flat
washers (6) for installation.
e. Remove lifting eye (2) and gasket (7) from left side of damper housing. Discard
gasket (7).
2. Remove right installation guide bar (8), lifting eye (2) and hour meter (9).
a. Disconnect hour meter (9) electrical connector (10).
b. Remove and discard four self-locking nuts (3).
c. Remove and discard two self-locking nuts (5).
d. Remove two flat washers (6) and right installation guide bar (8). Retain flat washers (6)
for installation.
e. Remove hour meter (9).
f. Remove lifting eye (2) from right side of damper housing.
2DR spacer plate: used in place of
installation guide bar.
3
2
7
2
10
1
4
3
6
5
9
3
3
8
6
5
WP 0132 00-2
|
||
|
||
