| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CYLINDER ASSEMBLY REPLACEMENT
0133 00
INSTALLATION (Continued)
7. Position piston (6) in cylinder (1) so that piston pin (10) is just outside of cylinder as shown.
a. Remove one piston pin (10) retaining ring (11).
b. Remove piston pin (10) from piston (6) while piston is still in cylinder.
c. Using suitable lifting device, place piston (6) and cylinder (1) over connecting rod (9).
d. Insert piston pin (10) through connecting rod (9) and piston (6).
e. Secure piston pin (10) with retaining ring (11) assuring that retaining ring at opposite end
of piston pin is in place.
f. Lower cylinder (1) over piston (6) and onto crankcase studs (5).
g. Temporarily secure with two base nuts (2) positioned approximately 180 degrees apart.
1
2
10
6
5
9
11
WP 0133 00-11
|
||
|
||
