| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CRANKSHAFT MAIN BEARINGS INSPECTION
0138 00
INSPECTION (Continued)
5. Check side clearance of center main bearing halves (1,2).
a. Using a feeler gauge, check clearance between bearing (1) flange and number 4 main
bearing journal in crankcase (5).
b. Using a feeler gauge, check clearance between bearing (2) flange and number 4 main
bearing cap.
c. Replace bearings that do not measure within 0.004 to 0.008-inch (0.1016-0.2032 mm)
clearance.
A
5
1
B
6
2
WP 0138 00-4
|
||
|
||
