| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
STARTER DRIVE MECHANISM REPAIR
0157 00
INSTALLATION (Continued)
NOTE
Spur gear (9) may have a woodruff key in the original installation.
The woodruff key is no longer used, discard it and torque the nut to
500/525 foot-pounds (When woodruff key is used the torque is 300/325
foot-pounds).
3. Install spur gear (9).
a. Apply lubricant (item 21, WP 0173) to spur gear shaft (7).
b. Position gear (9) onto shaft (7) and secure with plain slotted nut (6).
c. Torque slotted nut (6) to 500-525 foot-pounds (678-712 Nm).
4. Install mounting bracket (1).
a. Apply lubricant to studs (23).
b. Install mounting bracket (1) and new gasket (4) (item 184, WP 0175).
c. Secure using four new self-locking nuts (2) (item 140, WP 0175) with flat washers (3).
9
4
6
1
23
3
2
7
END OF WORK PACKAGE
WP 0157 00-11 (12 blank)
|
||
|
||
