| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE HOUSING REPLACE/REPAIR
0158 00
REMOVAL
NOTE
One of the 29 self-locking nuts with flat washers that secure the
accessory drive housing assembly was removed when the fire
extinguisher tube was removed.
Two of the self-locking nuts are accessed from underneath the
accessory base assembly.
1. Remove accessory drive assembly (1) fasteners.
5
a. Remove 24 self-locking nuts (2) with flat
washers (3).
2 (2 places)
3
4
b. Remove two self-locking nuts (2) with
2 (24 places)
flat washers (3) and seal washers
3
(packing with retainer) (4). (Left side
illustrated, right side is mirror image)
6,7
c. Remove two self-locking nuts (2) with
8
9
flat washers (3) from bottom side of
housing (1). (Left side illustrated, right
side is mirror image.)
1
d. Discard self-locking nuts and seal
washers.
2. Attach lifting sling (5).
a. Remove two self-locking nuts (6) with
flat washers (7) from the top two studs
between rear fan drive housing (8) and
accessory drive housing (9) to provide for
attachment of sling assembly.
3
2
WP 0158 00-2
|
||
|
||
