| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE HOUSING REPLACE/REPAIR
0158 00
INSTALLATION (Continued)
WARNING
Hanging or swinging
loads are dangerous,
12
use caution.
2. Install accessory drive housing
5
assembly (1).
1
a. Apply a thin coat of sealant (item 46,
accessory base (13).
b. Attach accessory drive sling (5) to a
suitable hoist (12).
c. Lift accessory housing assembly (1) high
enough to clear the long studs of the base
assembly (13).
d. Carefully lower assembly (1) into
13
position.
11
10
3. Remove lifting sling (5).
a. Remove two slave self-locking nuts (6)
5
with flat washers (7) attaching sling (5)
to accessory housing (9). Discard slave
nuts.
b. Remove slotted nut (10) at opposite end
of sling (5).
6,7
c. Remove sling (5).
9
1
d. Install two new self-locking nuts (6)
(item 33, WP 0175) with flat
washers (7).
WP 0158 00-21
|
||
|
||
