| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CAMSHAFT DRIVE GEAR SHAFT REPAIR (ACCESSORY DRIVE)
0159 00
CLEANING
See Work Package 0028 for Standard Cleaning Procedures.
INSPECTION
All parts must be inspected with care. Replace parts if damage or wear exceeds allowable
limits.
1.
See Work Package 0028 for Standard Inspection Procedures.
2.
Measure outside diameter (A) of plug (1). Replace plug if not within specifications in the
following table.
3.
Measure spherical outside diameter (B) of plug (1). Replace plug if not within specifications
in the following table.
4.
Measure outside diameter (C) of gear shaft (2). Replace gear shaft if not within specifications
in the following table.
5.
Measure inside diameter (D) of gear shaft (2). Replace gear shaft if not within specifications
in the following table.
Location
Sizes and Fit of New Parts
Wear Limits
inches (mm)
A (Outside diameter of plug)
1.1250 (28.58)
1.1255 (28.59)
None
B (Spherical diameter of plug)
0.6275 (15.94)
0.6280 (15.95)
0.6265 (15.91)
C (Outside diameter of gear shaft)
1.4970 (38.02)
1.4980 (38.05)
1.4960 (38.00)
D (Inside diameter of gear shaft)
1.1260 (28.60)
1.1270 (28.63)
1.1275 (28.64)
C
A
B
D
B
1
2
D
WP 0159 00-2
|
||
|
||
