| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE HOUSING BASE REPLACE/REPAIR
0160 00
INSTALLATION (Continued)
2. Install accessory base (1) onto crankcase.
a. Apply a thin coat of silicon sealing
compound (item 33, WP 0173) to
bottom mounting surface (A) of
1
accessory base (1).
A
A
b. Apply Lubriplate (item 23, WP 0173) to
A
six cap screws (5) and ten crankcase
studs (14).
c. Secure accessory base (1) to crankcase using six cap screws (5) with flat washers (6), and
ten slotted nuts (3) with flat washers (4).
d. Torque-tighten cap screws (5) and slotted nuts (3) to 23-25 foot-pounds (31-34 Nm).
e. Secure slotted nuts (3) with ten new cotter pins (2) (item 48, WP 0175).
3
2
5
6
4
14
1
END OF WORK PACKAGE
WP 0160 00-5 (6 blank)
|
||
|
||
