| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL INJECTION ADVANCE CONTROL REPAIR
0161 00
INSPECTION (Continued)
16. Measure vane (24).
a. Measure width (A), inside diameter (B), and width of slots (C) in vane (24).
b. Replace advance unit if vane (24) is not within specifications in the following table.
17. Measure cover (7).
a. Measure inside diameter (D) and outside diameter (E) of cover (7).
b. Replace advance unit if cover (7) is not within specifications in the following table.
Location
Sizes and Fit of New Parts
Wear Limits
inches (mm)
A (Vane width)
Check concurrently with vane housing to provide
None
0.0010-0.0015 (0.0254-0.0381) end clearance.
B (Vane)
1.8730 (47.5742)
1.8735 (47.5869)
1.8740 (47.5996)
C (Vane slots)
0.1020 (2.5908)
0.1060 (2.6924)
0.1070 (2.7178)
D (Cover)
1.8125 (46.0375)
1.8130 (46.0502)
1.8135 (46.0629)
E (Cover)
2.3735 (60.2869)
2.3745 (60.3123)
2.3730 (60.2742)
7
C
7
E
24
D
B
A
WP 0161 00-11
|
||
|
||
