| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FRONT FAN DRIVE AND HOUSING, REPLACE/REPAIR
0169 00
REMOVAL (Continued)
NOTE
One self-locking nut was removed from stud (15) when fire
extinguisher tube was removed.
3. Remove nine self-locking nuts (13) with flat washers (14) securing fan drive housing
assembly (11) to base. Discard self-locking nuts.
4. Cut and remove locking wire (16), then remove two screws (17) with flat washers (18) from
fan drive housing (11).
5. Install lifting tool (19) (item 2, WP 0177) on fan drive housing (11).
6. Remove front fan housing (11) and drive shaft (9) as an assembly.
19
11
11
16
13
17
14
18
9
15
WP 0169 00-3
|
||
|
||
