| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FRONT FAN DRIVE AND HOUSING, REPLACE/REPAIR
0169 00
INSPECTION (Continued)
4. Replace outer bearing (33) on [driven] bevel
33
gear shaft (32) with a new bearing that meets
34
specifications in the following table (A-
32
outside diameter, B-inside diameter).
5. Measure inside diameter (C) of sleeve spacer
(42). Replace sleeve spacer if not within the
specifications in the following table.
6. Replace inner bearing (34) on [driven] bevel
gear shaft (32) with a new bearing that meets
specifications in the following table (D-
inside diameter, E-outside diameter).
Location
Sizes and Fits of New Parts inches (mm)
Wear Limits
A (outside diameter)
2.6767 (67.9881)
2.6772 (68.0008)
none
B (inside diameter)
1.5743 (39.9872)
1.5748 (39.9999)
none
C (inside diameter)
1.5800 (40.1320)
1.5850 (40.2590)
1.5950 (40.5
D (inside diameter)
1.5743 (39.9872)
1.5748 (39.9999)
none
E (outside diameter)
3.1491 (79.9871)
3.1496 (79.9998)
none
A
B
C
33
D
E
42
34
WP 0169 00-10
|
||
|
||
