Custom Search
 
  
 
TM 9-2815-220-24
FRONT FAN DRIVE AND HOUSING, REPLACE/REPAIR
0169 00
ASSEMBLY (Continued)
7. Determine shim thickness for [drive] bevel gear shaft (24).
a. With endplay removed from bearing, measure total thickness of bearing from inner race to
outer race.
b. Add shims until a total thickness of 0.7891-inch (20.0431 mm) minimum to 0.7911-inch
(20.0939 mm) maximum is obtained.
c. Old and new shims may be mixed to obtain correct overall thickness.
8. Install new bearing (25).
a. Position shims (40) of predetermined thickness over hub of bevel gear shaft (24).
b. Using an arbor press (39), press new ball bearing (25) (item 294, WP 0175) onto bevel
gear shaft (24).
39
25
40
24
25
40
24
9. Using an arbor press (39), press bevel gear shaft (24) into new ball bearing (26) (item 297,
39
24
26
24
26
WP 0169 00-18

 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business