| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FAN DRIVE HOUSING BASE (DAMPER END) REPAIR
0170 00
INSTALL
1. Install fan drive housing base.
a. Install new O-ring (7) (item 63, WP 0175) into crankcase.
b. Apply a thin coat of sealant (item 33, WP 0173) on crankcase mounting surface of
base (1).
c. Install base (1) over studs (11) and onto crankcase.
d. Apply a small amount of Lubriplate (item 23, WP 0173) to ten studs (11), and two
screws (5).
e. Secure base (1) to crankcase with ten slotted plain nuts (3) and flat washers (4), two
screws (5), and flat washers (6).
f. Tighten ten slotted nuts (3) and two cap screws (5) to 23-25 foot-pounds (31-34 Nm).
g. Secure ten slotted nuts (3) with new cotter pins (2) (item 48, WP 0175).
5
3
6
4
1
2
7
11
END OF WORK PACKAGE
WP 0170 00-4
|
||
|
||
