| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
(25) Remove Cam Follower Housing Assemblies.
(a) Mark position of each cam follower housing assembly to ensure proper reassembly.
(b) Remove capscrews and lockwashers securing cam follower housing assemblies to cylinder block.
(c) Carefully tap on assemblies with softhead mallet to break free from assembly-positioning dowels.
(d) Remove cam follower housing assemblies.
NOTE
Measuring and recording of total thickness of gaskets (shims) for each housing is
necessary to establish proper injector timing. Thickness variations occur due to
differences in housing castings.
(e) Remove old shim(s), measure, and record thickness for each housing. After recording, discard shim(s).
3-41
|
||
|
||
