| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
(c) Thoroughly wipe area clean.
(d) Rotate engine to vertical position with front-end up.
(e) Rotate crankshaft so that rod bearing cap is accessible.
(f) Loosen connecting rod capscrews approximately 3/8 in. (9.52 mm).
CAUTION
DO NOT PRY OR HAMMER ON CONNECTING ROD CAPS. DAMAGE TO CAPS OR
RODS MAY RESULT.
(g) Tap on connecting rod capscrew heads with softhead mallet to pull caps away from dowel alignment pins.
3-48
|
||
|
||
