| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
NOTE
Replacement sleeve is designed to be 0.005 to 0.010 in. (0.127 to 0.254 mm) above
required counterbore depth.
(7) Check depth of counterbore ledge and cut to specifications.
e. Cylinder liner lower counterbore enlarging.
NOTE
Enlarging of lower counterbore is required to repair a cylinder block when
counterbore has been damaged, misalined, or its diameter has exceeded
specifications. Counterbore is enlarged to accept a replacement sleeve which will
provide liner seals with tight sealing surface.
(1) Assemble ST-1287 lower cylinder liner counterbore salvage boring tool:
(a) Remove thick 0-ring from bottom of boring tool.
(b) Slide 5-1/2 in. (768.35 mm) centering ring onto boring tool with taper on ring toward cutter.
(c) Reinstall 0-ring to retain centering ring.
3-84
|
||
|
||
