| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-1
Section IX. CAMSHAFT REPAIR
3-22. CLEAN CAMSHAFT
WARNING
WEAR PROTECTIVE CLOTHING AND GOGGLES WHILE STEAM CLEANING TO
PREVENT PERSONAL INJURY.
a. Steam clean camshaft. Dry thoroughly.
b. Remove orifice plug from front of camshaft .
WARNING
P-D-680 SOLVENT IS POTENTIALLY DANGEROUS. AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN. KEEP AWAY FROM FLAME OR EXCESSIVE
HEAT.
c. With nylon bristle brush and solvent, clean oil passage.
WARNING
COMPRESSED AIR USED FOR CLEANING PURPOSES WILL NOT EXCEED 30 PSI
(207 KPA). USE ONLY WITH EFFECTIVE CHIP GUARDING AND PERSONAL
PROTECTIVE EQUIPMENT (GOGGLES, SHIELD, GLOVES, ETC.).
d. Flush passage with clean solvent and blow compressed air into passage to clear of particles.
CAUTION
DO NOT INTERMIX ORIFICE PLUG WITH COMMON 1/8 IN. (3.175 MM) PLUG.
ENSURE THAT ORIFICE PLUG IS CORRECT PART NUMBER. IMPROPER PLUG
WILL CUT OFF OIL FLOW.
e. Reinstall orifice plug and torque to 5 - 10 ft lbs (7 - 14 Nm).
3-146
|
||
|
||
