Section XIV. CAM FOLLOWER HOUSING ASSEMBLY REPAIR

Custom Search

Back
INSPECT PUSH TUBES

Up
TM-9-2815-226-34-1 Engine Diesel 6 Cylinder Inline Turbocharged Cummins NTC-400 BC2 Manual

Next
INSPECT CAM FOLLOWER HOUSING ASSEMBLY

TM 9-2815-226-34-1

Section XIV. CAM FOLLOWER HOUSING ASSEMBLY REPAIR

3-38. DISASSEMBLE CAM FOLLOWER HOUSING ASSEMBLY

WARNING

COMPRESSED AIR USED FOR CLEANING PURPOSES WILL NOT EXCEED 30 PSI

(207 KPA). USE ONLY WITH EFFECTIVE CHIP GUARDING AND PERSONAL

PROTECTIVE EQUIPMENT (GOGGLES, SHIELD, GLOVES, ETC.).

P-D-680 SOLVENT IS POTENTIALLY DANGEROUS. AVOID PROLONGED OR

REPEATED CONTACT WITH SKIN. KEEP AWAY FROM FLAME OR EXCESSIVE

HEAT.

a. Clean housing and cam follower assembly with solvent. Dry with compressed air.

b. Disassemble cam follower housing assembly.

NOTE

Each housing has two cam follower shafts.

(1) Remove two lockscrews securing shafts to housing.

(2) With sharp pointed prick punch, punch hole in center of housing expansion cup plug.

3-212