REPAIR CAM FOLLOWER HOUSING ASSEMBLY

Custom Search

Back
Inspect cam follower lever rollers and pins. (cont)

Up
TM-9-2815-226-34-1 Engine Diesel 6 Cylinder Inline Turbocharged Cummins NTC-400 BC2 Manual

Next
Replace follower lever insert.

TM 9-2815-226-34-1

3-40. REPAIR CAM FOLLOWER HOUSING ASSEMBLY

a. Replace lever bushing.

NOTE

ST-249 mandrel and block set is used to remove and install lever bushing.

(1) Place lever on block.

(2) Insert ST-249-1 mandrel in bushing.

(3) Press bushing out of lever. Discard bushing.

WARNING

COMPRESSED AIR USED FOR CLEANING PURPOSES WILL NOT EXCEED 30 PSI

(207 KPA). USE ONLY WITH EFFECTIVE CHIP GUARDING AND PERSONAL

PROTECTIVE EQUIPMENT (GOGGLES, SHIELD, GLOVES, ETC.).

(4) Used compressed air to clean out oil passage in lever bushing bore.

(5) Wipe bore clean.

CAUTION

OIL HOLES MUST ALINE TO PREVENT RAPID BUSHING WEAR AND FAILURE.

(6) Aline oil hole in new bushing with hole in follower lever.

3-219