| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
(27) Turn indicator knob to left until 3/8 in. (9.5 mm) from largest knob.
(28) Turn needle shaft knob to right to unlock from indicator knob and retract needle.
(29) Reset counter and recheck delivery flow.
(30) If delivery more than 177 cc, unclamp injector and remove from test stand.
(31) Remove old orifice plug and gasket and discard.
(32) With new gasket, screw new orifice into injector inlet port. Torque to 8 -10 in. lbs (0.9 1.1 Nm) with tool no.
3376177 torque wrench.
(33) Reclamp injector on test stand and perform delivery flow test.
(34) Unclamp injector, shut down test stand with start-stop switch and remove injector.
(35) Withdra w injector from injector adapter pot.
3-283
|
||
|
||
