| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
(9) Using micrometer, measure drive shaft bore in dowel ring. Discard dowel ring if bore not within 0.5011 and
0.5016 in. (12.7279 and 12.7406 mm).
WARNING
P-D-680 SOLVENT IS POTENTIALLY DANGEROUS. AVOID PROLONGED OR
REPEATED CONTACT WITH SKIN. KEEP AWAY FROM FLAME OR EXCESSIVE
HEAT.
(10) Check lubrication holes in gear cover and gear body for cleanliness.
Clean in cleaning solvent as
necessary.
(11) Inspect all other parts for cracks, breaks, and other damage. Discard if defective.
d. Assemble fuel gear pump assembly.
(1) Screw pipe plug into gea r body. Torque plug to 10 - 13 ft lbs (14 - 18 Nm).
(2) With 3375959 driver, install pressure valve in gear cover. Valve must be even to 0.015 in. (0.381 mm)
below cover face.
3-300
|
||
|
||
