| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
NOTE
If the throttle shaft cover has
not already been removed, its removal will be
necessary to gain access to the
no-air adjustment screw. Adjustment of the no-air
adjustment screw is necessary
for proper calibration of the fuel pump. Perform
steps (6) through (10) to remove
the throttle shaft cover.
CAUTION
BE CAREFUL NOT TO DAMAGE MAIN HOUSING WHEN REMOVING DRIVE PINS.
(6)
Using channel lock pliers or chisel, carefully remove drive pins from throttle shaft cover.
3-336
|
||
|
||
