| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
NOTE
All adjustments to the AFC plunger setting must be made when no-air adjusting
screw is bottomed in the pump main housing.
No-air adjusting tool 3375140 is part of the AFC fuel pump adjusting tool kit tool
no. 3375189.
(2) With no-air adjusting tool, loosen locknut and turn adjusting screw clockwise until it bottoms in pump main
housing.
(3) Set pump speed at 1600 rpm.
(4) Reduce regulated shop air pressure to 0 psi (2.2 in. Hg).
(5) Check that fuel level in flowmeter stabilizes at or near zero.
3-367
|
||
|
||
