| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
CAUTION
ENSURE THAT LOWER BAND OF RING COMPRESSION TOOL DOES NOT SLIP
DOWN AND BIND PISTON. RINGS MAY BREAK.
NOTE
Two persons should be used for the following step.
(17) Carefully push piston and rod assembly through ring compressor until rings are in liner. Guide nylon guide
pins around crankshaft journal as piston is pushed into liner.
(18) Remove compression tool.
CAUTION
DO NOT FORCE PISTON ASSEMBLY INTO LINER. IF PISTON DOES NOT INSTALL
FREELY INTO LINER, REMOVE ASSEMBLY AND CHECK FOR BROKEN RINGS.
(19) Continue pushing piston into liner until rod bearing seats on crankshaft journal. Seat by pulling on nylon
pins.
(20) Remove guide pins.
3-409
|
||
|
||
