| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
(5)
At Phase 1.
(a)
Run engine until normal oil operating temperature is obtained.
(b)
Run at speed and horsepower indicated.
(c)
Check for proper blow-by, oil pressure, oil temperature, and coolant temperature
indications.
(d)
Check for fuel, oil, coolant, and air leaks.
(e)
Cool and shut down engine.
(f)
Service oil system as required.
(6)
At Phase 2.
(a)
Run engine at speed and horsepower indicated.
(b)
Perform all checks listed in Phase 1.
(c)
Set engine idle speed and governed speed.
(d)
Service oil system as required.
(7)
At Phase 3.
(a)
Run engine at speed and horsepower indicated.
(b)
Perform all checks listed in Phase 1.
(c)
Cool and shut down engine.
(d)
Service oil system as required.
(8)
At Phase 4.
(a)
Run engine at speed and horsepower indicated.
(b)
Check closely for leaks and tighten all accessible capscrews.
(c)
Perform power check below (para g).
(d)
Cool and shut down engine.
(e)
Check injector and valve adjustment clearances.
3-470
|
||
|
||
