TM 9-2815-237-34
2-32. FUEL INJECTION PUMP REPAIR (Cont’d)
40. Rotate housing (9) and holding fixture right side up.
41. Remove head locking capscrew (1).
42. Remove hydraulic head assembly (7) from housing (9).
43. Remove six weights (8), washer (3), and governor thrust sleeve (2) from hydraulic head (7).
44. Remove liner locating ring (4) and two rotor retainers (5) from hydraulic head (7).
45.
Remove transfer pump end cap seal (6) from hydraulic head (7). Discard seal (6).
2-92
|
|
