TM 9-2815-237-34
2-32. FUEL INJECTION PUMP REPAIR (Cont’d)
CAUTION
34.
35.
36.
37.
38.
39.
40.
Adjusting plug must not be installed past flush with end of
regulator or pump damage will result.
Install piston (10), spring (14), and adjusting plug (11) in regulator (9). Tighten adjusting plug (11)
until flush with end of regulator (9).
Install filter screen (12) in pressure plate (13).
Install pressure plate (13) and filter screen (12) on regulator (9).
Lightly coat beveled surface of pressure plate (13) and threads of transfer end cap (17) with seal
lubricant.
Install pressure plate assembly (15) and end cap (17) on hydraulic head (1). Apply slight pressure
on top of end cap (17) and rotate counterclockwise until a slight click is heard.
Turn end cap (17) clockwise until snug.
Install inlet tube assembly (16) on end cap (17).
2-113
|
|
