TM 9-2815-237-34 2-140.18          Change 1 2-35.3.   (6.2L or 6.5L)  FUEL INJECTION PUMPS (DB2829-4523, DB2829-4879, or DB2831-5149) CALIBRATION USING FUEL INJECTION PUMP TEST STAND (FTIS) MODEL A8022 (Cont’d) b. Test Stand Setup Procedures 1.  Cathode Ray Tube (CRT) Monitor 2.  Injection Pump/Auxiliary Selector 3.  DC Supply Selector 4.  Printer Switch 5.  Accumulator Switch 6.  Low-Limit Thumbwheel 7.  Outlet Number 8.  Number of Outlets 9.  Stop 10.  Mode Selector 11.  Ratio Switch 12.  Units Switch 13.  Hi-Limit Thumbwheel 14.  Stroke 15.  Pump Rotation Selector 16.  Speed Select Control 17.  Main Drive Off 18.  Main Drive On 19.  Lube Oil System Off 20.  Calibration Fluid System Off Pushbutton 21.  Nominal Temperature Thumbwheel 22.  Stop 23.  Reservoir Bulkhead Selector 24.  Calibration Fluid System On Pushbutton 25.  Lube Oil System On 26.  Calibration Fluid System 27.  Calibration Fluid Pressure 28.  Lube Pressure