TM 9--2815--247--34 0022 00--2 TRANSMISSION CASE ADAPTER ASSEMBLY REPLACEMENT -- CONTINUED 0022 00 Repair Replace damaged, bent, or stripped studs (6). Refer to WP 0012 00. REF NO. SETTING HEIGHT NO. REQUIRED STUD SIZE AND LENGTH 6 1 -- 5/16 24 1/2--13(3/4)X1/2--20(13/16)X1--15/16 Installation WARNING 1.   Install new preformed packing (5) on adapter (3). 2.   Lubricate 23 screws (1) with lubricant. 3.   Install transmission case adapter (3) on engine (4) with 23 screws (1) and 23 new lockwashers (2). 4.   Torque 23 screws (1) to 23--27 lb--ft (31--37 NSm). Figure 1 1 2 3 4 5 6 NOTE FOLLOW--ON MAINTENANCE: Install wiring harnesses 3W200 and 3W201 (TM 9--2350--292--20) Install flywheel (WP 0024 00) END OF TASK