TM 9--2815--247--34 0032 00--1 INTAKE MANIFOLD REPAIR 0032 00 THIS WORK PACKAGE COVERS: Disassembly, Inspection, Repair, Assembly INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Materials/Parts Lockwashers (20) (item 147, WP 0102 00) Preformed packings (6) (item 75, WP 0102 00) Pipe plug (R.B. only) (item 106, WP 0102 00) Lubricant (item 12, WP 0100 00) Equipment Conditions Intake manifold and aftercooler assembly removed (either left or right side) (WP 0031 00) Disassembly NOTE The maintenance procedure is the same for the left or right side intake manifold. This task repairs the left side only. Four self--locking nuts were removed with the manifold heater coil. 1.   Remove 20 screws (1) and 20 lockwashers (2) from intake manifold (3). Discard lockwashers. 2.   Remove three intake manifold tubes (4), intake manifold tube (5), and two intake manifold tubes (6) from intake manifold (3). 3.   Remove six intake manifold flanges (7), six preformed packings (8), six spring washers (9), and six spacer rings (10). Discard preformed packings. Figure 27 5 4 3 7 10 6 8 9 2 1