TM 9--2815--247--34
0037 00--19
FUEL INJECTOR TUBES, BRACKETS, AND ASSOCIATED PARTS --
CONTINUED
0037 00
Installation -- Continued
50. Install clamp (DETAIL F) onto bracket in location shown in illustration.
CAUTION
Where bending tubes is required, be careful not to nick
tubing. The bending tools are designed to allow bending
without nicks.
51. Using two bending tools (72), align tubes to fit within 1/8 inch in any direction with fairlead halves.
52. Apply a small amount of lubricant (item 12, WP 0100 00) to threads of cap screw (26).
53. Install two fairlead halves (29 and 30), retaining strap (28), screw (26), and new self--locking nut (27), to bracket,
(DETAIL F).
54. Tighten screw (26) to 160--180 lb--in (18--20 NSm).
Figure 36
RIGHT BANK
FLYWHEEL
END
DAMPER
END
F
F
26
27
28
29
30
72
LEFT BANK
|
|
