TM 9--2815--247--34 0038 00--1 FLEXIBLE COUPLING SHAFT ASSEMBLY (METERING PUMP) REPAIR 0038 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Inspection, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Torque wrench (item 51, WP 0103 00) Coupling puller (item 5, WP 0103 00) Machinist’s vise (item 83, WP 0103 00) Dial indicator (item 22, WP 0103 00) Materials/Parts Preformed packing (item 85, WP 0102 00) Preformed packings (2) (item 89, WP 0102 00) Pipe plugs (2) (item 103, WP 0102 00) Woodruff keys (2) (item 39, WP 0102 00) Lockwashers (2) (item 151, WP 0102 00) Lubricant (item 13, WP 0100 00) Materials/Parts -- Continued 3/4” bolt (item 79, WP 0103 00) 3/4” nut (item 80, WP 0103 00) 3/4” washer (item 81, WP 0103 00) Equipment Conditions Engine level on flat surface (WP 0021 00) Engine cleaned and drained (TM 9--2350--292--20) Fuel metering pump assembly removed (WP 0039 00) References TM 9--2350--292--20 Removal CAUTION Make sure coupling sleeves and hubs are stamped with identification marks to prevent mismating of parts. The sleeves and hubs are matched for each assembly and must not be interchanged between assemblies. NOTE Coupling sleeve must be in a rigid position to remove nut. 1.   Remove plain nut (1) and lockwasher (2) from fuel metering pump (3). Discard lockwasher. Figure 35 1 2 3