TM 9--2815--247--34 0039 00--1 FUEL METERING PUMP ASSEMBLY REPAIR 0039 00 THIS WORK PACKAGE COVERS: Removal, Repair, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Torque wrench (item 51, WP 0103 00) Engine turning tool (flywheel end) (item 1, WP 0104 00) Chain, lift assembly (item 72, WP 0103 00) Crowfoot attachment (item 94, WP 0103 00) Adapter (item 99, WP 0103 00) Drift punches (2) (item 111, WP 0103 00) Materials/Parts Preformed packing (item 80, WP 0102 00) Lubricant (item 12, WP 0100 00) Lubricant (item 9, WP 0100 00) Cotter pin (item 91, WP 0102 00) Self--locking nut (item 49, WP 0102 00) Lubrication fitting (item 162, WP 0102 00) Reducer, pipe (item 63, WP 0102 00) Equipment Conditions Lockwashers (4) (item 148, WP 0102 00) Pipe plugs (2) (item 103, WP 0102 00) Equipment Conditions Engine level on flat surface (WP 0021 00) Engine cleaned and drained (TM 9--2350--292--20) Fuel injector tubes removed (WP 0037 00) References TM 9--2350--292--20 TM 9--2910--212--34P Removal 1.   Disconnect electrical lead (1) from fuel metering pump (2). 2.   Disconnect smoke limiter hose (3) from fuel metering pump (2). 3.   Disconnect oil inlet hose (4) and fuel inlet hose (5) from fuel metering pump (2). 4.   Disconnect fuel return hose (6) from fuel metering pump (2). Figure 48 2 1 4 3 5 6