TM 9--2815--247--34 0053 00--1 SHROUD REPAIR 0053 00 THIS WORK PACKAGE COVERS: Removal, Repair, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Welding shop equipment (TRL MTD) (item 67, WP 0103 00) Materials/Parts Lockwashers (9) (item 144, WP 0102 00) Grommets (2)(item 155, WP 0102 00) Assembled washer bolts (4) (item 160, WP 0102 00) Assembled washer screws (3) (item 157, WP 0102 00) Self--locking nuts (30) (item 158, WP 0102 00) Lockwasher (3) (item 146, WP 0102 00) Lockwashers (9) (item 161, WP 0102 00) Assembled washer screw (17) (item 156, WP 0102 00) Equipment Conditions Engine level on flat surface (WP 0021 00) Engine cleaned and drained (TM 9--2350--292--20) Fans and covers removed (TM 9--2350--292--20) Engine top housing assembly removed (TM 9--2350--292--20) Equipment Conditions -- Continued Fuel pump removed (TM 9--2350--292--20) Fuel shut--off cable removed (TM 9--2350--292--20) Oil breather tubes removed (TM 9--2350--292--20) Fuel return lines removed (TM 9--2350--292--20) Fire extinguisher tube removed (WP 0055 00) Smoke generation system removed (TM 9--2350--292--20) Throttle linkage removed (WP 0048 00) Primary fuel filter bracket removed (WP 0091 00) Fuel/water separator filter mounting bracket removed (WP 0090 00) References TM 9--2350--292--20 Removal NOTE Note length, position, type and quantity of attaching hard- ware during removal to aid in installation. Remove attaching hardware securing shrouds to engine as shown in illustrations. Discard grommets, lock- washers, assembled washer bolts and assembled washer screws.