TM 9--2815--247--34
0054 00--12
FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS REPAIR --
CONTINUED
0054 00
Assembly -- Continued
7. Lubricate four clutch disks (27 and 28) with lubricant (item 14, WP 0100 00).
8. Install four clutch disks (27 and 28) in fan drive hub assembly (22) as shown.
9. Install flange (23) over clutch disks and on fan drive hub assembly (22).
10. Equally space four bolts (49) through friction clutch (15) and secure with four flat washers (50) and four nuts (51).
Alternately tighten the four nuts (51) to draw the friction clutch (15) together.
11. Install 12 machine bolts (21) and torque to 150--160 lb--in (17--18 NSm).
12. Remove four nuts (51), four flat washers (50) and four bolts (49).
13. Install 4 machine bolts (21) and torque to 150--160 lb--in (17--18 NSm).
14. Install new locking wire (20).
15. Repeat test steps 1, 2 and 3.
16. Press ball bearing (19) in access cover (13) using an arbor press (18).
Figure 55
18
13
19
20
21
22
23
27
27
28
28
49
50
51
15
|
|
