TM 9--2815--247--34
0055 00--1
FIRE EXTINGUISHER TUBE REPLACEMENT
0055 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 19, WP 0103 00)
Materials/Parts
Self--locking nuts (2) (item 55, WP 0102 00)
Lockwasher (item 154, WP 0102 00)
Self--locking nut (item 44, WP 0102 00)
Equipment Conditions
Engine level on flat surface (WP 0021 00)
Engine top housing assembly removed
(TM 9--2350--292--20)
Equipment Conditions -- Continued
Left side fuel injector lines removed
(WP 0037 00)
Oil breather tubes removed
(TM 9--2350--292--20)
Fuel return lines removed
(TM 9--2350--292--20)
Reference
TM 9--2350--292--20
Removal
1. Remove two self--locking nuts (1) from two loop clamps (2) and two loop clamps (3). Discard self--locking nuts.
2. Remove screw (4), self--locking nut (5) and two loop clamps (6). Discard self--locking nut.
3. Remove loop clamp (2) and loop clamp (3) and loop clamp (6) from fire extinguisher tube (7).
4. Remove fire extinguisher tube (7) from straight pipe adapter (8).
5. Remove nut (9), lockwasher (10), and straight pipe adapter (8) from engine shroud (11). Discard lockwasher.
6. Inspect parts for damage and replace as required.
Figure 69
7
8
1110
9
3
4
1
2
5
6
6
3
2
1
|
|
