TM 9--2815--247--34 0067 00--1 CRANKSHAFT BEARINGS AND ASSOCIATED PARTS REPLACEMENT 0067 00 THIS WORK PACKAGE COVERS: Disassembly, Inspection, Assembly INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Hand jack screw (item 23, WP 0103 00) Slide hammer puller assembly (item 27, WP 0103 00) Mechanical adapter (item 1, WP 0103 00) Torque wrench (item 51, WP 0103 00) Outside micrometer caliper set (item 9, WP 0103 00) Inside micrometer caliper set (item 10, WP 0103 00) Dial indicator (item 22, WP 0103 00) Crowfoot attachment (item 94, WP 0103 00) Materials/Parts Seal (item 129, WP 0102 00) Lubricant (item 12, WP 0100 00) Prussian blue (item 17, WP 0100 00) Materials/Parts -- Continued Adhesive (item 29, WP 0100 00) Lubricant (item 14, WP 0100 00) Lubricant (item 15, WP 0100 00) Equipment Conditions Engine on maintenance stand (WP 0056 00) Crankshaft removed (WP 0064 00) Personnel Required Two Disassembly 1.   Remove spring (1) from lip in crankshaft oil seal (2) and remove split oil seal (2) from crankshaft (3). 2.   Position oil seal spring (1) so ends can be seen for removal. Twist male end clockwise and female end counter- clockwise and remove spring (1) from crankshaft (3). Discard oil seal and spring. Figure 6 1 3 1 2 3