TM 9--2815--247--34 0006 00--1 ENGINE OVERSPEEDS 0006 00 THIS WORK PACKAGE COVERS: Engine Overspeeds INITIAL SETUP: Tools and special Tools General mechanic’s tool kit (item 19, WP 0103 00) Equipment Conditions Engine deck removed (TM 9--2350--292--20) Vehicle MASTER switch OFF (TM 9--2350--292--10) Personnel Required Two Are fan blades and drives free of damage? 1.  Remove cooling fans (TM 9--2350--292--20). 2.  Inspect cooling fan blades and fan drives for damage (TM 9--2350--292--20 and WP 0095 00 and WP 0096 00). no yes no yes A B CONTINUED ON NEXT PAGE Check fan clutches for proper adjustment (WP 0095 00 and WP 0096 00). Are fan clutches properly adjusted? WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. Replace blades (TM 9--2350--292--34) or drives (WP 0096 00). Verify fault is corrected. Repair fan clutches (WP 0095 00 and WP 0096 00). Verify fault is corrected. C Inspect governor control rod bearings and bushings for excessive wear and damage. Are governor control rod bearings and bushings free of excessive wear and damage? FORWARD